Light up your festive season effortlessly with the Prestige 6ft self-inflating reindeer, featuring six bright LEDs and energy-saving mains power for a warm, inviting glow indoors or outdoors. Quick to set up and full of holiday cheer!
Description
The Prestige 6ft self-inflating reindeer is an excellent addition to your holiday decorations, suitable for both indoor and outdoor settings. This festive decoration is powered by mains electricity and incorporates an energy-efficient design, helping to reduce power consumption while maintaining a bright display. It features six charming and bright LEDs that illuminate the reindeer, casting a warm and inviting glow that enhances the holiday atmosphere. The self-inflating mechanism ensures a quick and straightforward setup process, making it easy to include in your seasonal décor without hassle or delay.
P42938-A34728Features
- Dimensions: H190cm (approximate)
- Indoor & Outdoor
- Mains Operated
- Energy Saving
- Self-Inflating
- 6 LEDs
Safety Information
Instruction Manual BEFORE USING THIS PRODUCT: READ, UNDERSTAND AND FOLLOW THESE INSTRUCTIONS AND WARNINGS AND RETAIN FOR FUTURE REFERENCE. IMPORTANT SAFETY INSTRUCTIONS
- This is a seasonal decoration and is not intended for permanent installation or for year-round use. It is recommended not to use for more than 90 consecutive days.
- Do not attempt to inflate during unusually strong winds. If it becomes too windy for safe operation, simply allow your inflatable to deflate, secure it, and wait for better conditions before re-inflating.
- This is an electric decoration - not a toy. Keep the product out of the reach of children and pets to avoid the risk of fire, burns, electrical shock, or serious personal injury. Extra caution is necessary when using this product near children. Do not allow children or pets to play near the product.
- Protect the electric fan and power cord from exposure to water. This precaution will reduce the risk of electrical shock. Do not use anything with this product that is not included in the original manufacturer' s packaging when purchased. Do not expose the product to sharp items, as these may cause rupture and damage. The repair of the damaged main connection cable is only allowed for a qualified technician. Do not hang ornaments or other objects on the product. If running the power cable through a door or window do not close on the cable as this may cause damage. Do not secure the wiring of the product with staples, nails or other sharp object, or place wiring on sharp hooks or nails. When the temperature is below 5F (-15°), the motor may temporarily stop running. The motor will begin function again in higher temperature.
WARNING! This decoration is suitable for indoor and outdoor use but the adaptor MUST be located indoors only! Note: This inflatable is also suitable for indoor use but be aware it is 6ft when inflated - only locate in a room where it cannot cause a hazard or come into contact with anything that could cause a hazard. Page 1 Set Up & Use:
- Place inflatable in a clean, open area, free from obstruction or other debris. Roll out fabric and lay out the contents.
- Plug in the adaptor in the appropriate electric outlet. Turn unit upright. Make sure the air intake of fan is clear of fabric and free of obstruction. Be sure the zipper is closed in order to let the inflatable figure fully inflate. To secure the Inflatable from winds, insert a stake into the ground through each of the holes in the lower tabs of the inflatable figure. To deflate, simply unplug from the outlet device and open zipper on back of inflatable. Do not unplug by pulling on cord but rather by the plug directly. Adjust the sealed weight-bag to position your inflatable Package Contents: Inflatable Unit with adapter, 3 x tether ropes, 6 x stakes Care and Maintenance
- Periodically check to ensure there are no holes or tears in the inflatable figure. Only use mild detergent with cold water and use a soft damp cloth to wipe clean the figure. Periodically unplug the product from the electrical outlet to allow the transformer and fan to cool down to avoid overheating and/or product damage. Neatly fold and store the product in a cool, dry location that is away from sunlight or heat sources. Unplug, roll up and store in original package or similar size box. Do not wipe clean the motor. Trouble shooting Guide Item will not fully inflate:
- Ensure zippers on the back of each inflatable figure are closed. Inspect fabric for tears and holes; repair if necessary. Make sure the fan is not obstructed by any debris or snow. Unplug fan from the electrical outlet and let cool down completely, before clearing debris. Fan does not operate: Ensure fan is plugged into a working outlet (for indoors, a standard AC outlet, for outdoors a GFCI outlet). Fan may be overheated. Unplug the fan from the electrical outlet and let cool down completely.