Firefly Motion Sensor LED Security Solar Light

Please read the following carefully to ensure the satisfactory and safe operation of the light. USING YOUR NEW LIGHTS: Carefully remove the light from the display packaging. Slide or press the switch from the ‘OFF’ to ‘ON’ position. Remove the bracket by sliding it from the back of the light. Secure the bracket with the plugs and screws provided to the desired location. Slide the light back on the bracket. Ensure that the solar panel is placed in direct sunlight for 6-8 hours. The solar light will automatically turn on at dusk and shut off at dawn. To turn the light & solar panel off completely, slide or press the switch to the ‘OFF’ position. Note: The light will not illuminate during the daytime or in a bright environment. Solar powered lights work by recharging their built in battery daily from electricity converted from sunlight via the solar panel. The lights are turned on automatically by a sensor at night. The more sunlight the solar panel receives in the day, the longer the lights will operate that night. Operating time will vary by specific location and amount of sunlight received, so ensure that the solar panel is positioned in a location that will receive good sunlight during the day and is not shaded by buildings or trees etc. Keep the solar panel clear of dust, snow and debris. Clean it with a soft damp cloth periodically. Do not use corrosive cleaning agents or chemical solutions. The selected location should not be near night time light sources such as a porch light or street lights, as these may cause the solar light to turn off prematurely. Do not charge behind glass.